IconLib Get <SysEx> from Instrument (Library Window)



Receive loads a Patch from an instrument directly into an existing Library.

In most instances, the Library will load the Patch which is currently in use by the instrument.

In some instances due to instrument limitations, you can not load the current Patch and must choose a Patch from a specific memory location in the instrument. If you find that you are always loading the same Patch regardless of which Patch is selected in the instrument, your instrument probably falls into this category. In this case, you should follow these steps to load a particular Patch:


1.Select the 'Settings' button to display the Settings dialog.
2.Go to the Custom tab and assign the custom # for the type of SysEx being edited and set it to the current patch number
3.Press the OK button to return to the Library.
4.Select the Receive button or choose Library/Receive from Instrument


To load a Patch directly from the instrument and add it to the Library:

1.On the instrument, select the Patch to load (if appropriate)
2.Select the Receive button or choose Library/Receive from Instrument

Key Equivalent:


Available in:

Midi Quest Pro


Midi Quest


Midi Quest Essentials


Midi Quest one